JMD P1 Ethernet reader + 2 port splitter

New design P1 smart reader, P1 meter Info
BUTTON_POST_REPLY
admin
Site Admin
BerichtenCOLON 27
GeregistreerdCOLON 27 Jan 2022 09:52

JMD P1 Ethernet reader + 2 port splitter

Bericht door admin »

Connection:
  • RJ12 in(Black) 2x RJ12 out (Gray)
  • USB-C
  • RJ45
Case: Black ABS Plastic
Size: 75 x 45 x 28 mm
Can be mounted on the wall with 1 or 2 screws.
Power usage ~165mA
Output power cannot exceed 100mA, otherwise you have to use a external 5V USB-C power supply

RJ12 output ports are active and isolated and respond as P1 meter.
The output is useful for your charging station.

Works direct om Domoticz and Home Assistant
Delivered with 50cm RJ12 cable

Price: €38.00

Warranty 2 years

EAN: 6150622067043 Click to buy

Order and Info support@7er.nl

IMG_3118a.JPG
IMG_3118a.JPG (96.02 KiB) 57 keer bekeken
Default login: User: admin , Password: admin
Default port: 23
Default baudrate : 115200 8 bits 1 Stop Bit no Parity

Setup Domoticz
Add to Domoticz (pdf)

Setup Home Assitant
Add to Home Assitant (pdf)

How to retore settings:

Select "OTHERS"
Then "+ Choose File" to restore settings

Afbeelding

Config file for DSRM 3/4/5
Default config file (xml) (115200/8/1/none )

Config file for DSRM 2.2
Config file (xml) (9600/7/1/even)

I you upload a new config file all settings are reset to default, the NAT will automatic Enabled.
Whit this python script you can Disable NAT again: JMDPatch.py)
Use python JMDPatch.py IP
IP is ip of your reader.

Any question mail support@7er.nl

You can do it yourself:
http://domoticx.com/p1-poort-slimme-meter-hardware/

Some technical info

Yellow = in Blue = out
Bijlagen
IMG_3122a.JPG
IMG_3122a.JPG (130.99 KiB) 57 keer bekeken
IMG_3121a.JPG
IMG_3121a.JPG (87.58 KiB) 57 keer bekeken
IMG_3125a.JPG
IMG_3125a.JPG (109.63 KiB) 57 keer bekeken
BUTTON_POST_REPLY