- RJ12 in RJ12 out
- USB-C
- RJ45
Size: 75 x 45 x 28 mm
Can be mounted on the wall with 1 or 2 screws.
Power usage ~147mA
Output power cannot exceed 100mA, otherwise you have to use a external 5V USB-C power supply
RJ12 output port is active and isolated and respond as P1 meter.
The output is usefull for your charging station.
Works direct om Domoticz and Home Assistant
Delivered with 50cm RJ12 cable
Price: €36.00
EAN: 6150636026036 Click to buy
Order and Info support@7er.nl
- IMG_2620a.JPG (160.44 KiB) 4103 keer bekeken
Default port: 23 Telnet protocol
Alternate port 24: TCP-Server
Default baudrate : 115200 8 bits 1 Stop Bit no Parity
Setup Domoticz
Add to Domoticz (pdf)
Setup Home Assitant
Add to Home Assistant (pdf)
How to retore settings:
Select "OTHERS"
Then "+ Choose File" to restore settings
Config file for DSRM 3/4/5
Default config file (xml) (115200/8/1/none )
Config file for DSRM 2.2
Config file (xml) (9600/7/1/even)
I you upload a new config file all settings are reset to default, the NAT will automatic Enabled.
Whit this python script you can Disable NAT again: JMDPatch.py)
Use python JMDPatch.py IP
IP is ip of your reader.
Any question mail support@7er.nl
You can do it yourself:
http://domoticx.com/p1-poort-slimme-meter-hardware/
Some technical info
Yellow = in Blue = out